Gill R&D have been producing advanced electronic products for extreme applications for over 30 years.

We offer a complete service covering the entire electronics development lifecycle, including requirements gathering and specification, prototyping, simulation, testing and verification. Liaising closely with clients, Gill provides detailed reports and expert support throughout development to ensure requirements are fully met.

Our wide range of engineering disciplines and use of cutting-edge electronics development techniques enables us to provide our clients with complete, proven, economic solutions in short timeframes.


Features and Benefits

Diverse technology

Intrinsic Safety

Low power

FPGA development (Xilinx, Lattice, Altera)

Microchip/PIC, Atmel, ST, Cortex, ST32, TMS320 processor development

Software Development (C/C++/Assembler) for embedded systems (RTOS,Linux) and PC-based applications (WindowsAdvanced simulation and FEA modelling

Test system development

Battery, charging and energy management

High sensitivity/low noise RF

Ultrasonic flow rate/volume solutions

Liquid level measurement

Advanced, multilayer PCB design (flexi/rigid/mixed, blind/buried/stacked vias, high temperature substrates, controlled impedance RF design)

Full design and verification service

From fully managed, full lifecycle projects to extremely rapid, focussed design packages

Electronic design, circuit board and PCB design

Rapid prototype service

Full manufacturing facilities

Including SMD, assembly and calibration

ISO 9000 with full release/version control


Typical Phases of Development

Initial consultation to ensure we fully understand the customers’ requirements, timescales and aims

Early stage schematic design with BOM, power requirements and functional operation reports from simulation

Complete schematic design with full design reports, estimated manufacturing costs, and test results

Reports for PCB layout constraints and recommendations

Electronic and electromechanical CAD library component creation

Full constraint driven PCB design and mechanical integration

Customer focussed Key milestone design review and verification


Do you have a new development requirement?

We have extensive experience taking projects through all phases of development, in rapid timeframes.


Tel: +44 (0)1590 613400








Website Terms & Conditions |  Privacy Notice  |  Cookies Policy  |  Sitemap  |  Search  |  Careers

Terms & Conditions for Sales of Goods  |  Terms & Conditions for the Supply of Goods and Services

©2019 Gill Research & Development Limited. All rights reserved. Gill Research & Development Limited, Reg No. 3154453. Registered Office: The Towngate House, 2-8 Parkstone Road, Poole. BH15 2PW

Warning: file_put_contents(/kunden/homepages/9/d315339365/htdocs/gillrd/files/cache/pages/2/9/d/29d12de82003b783bbc932e56a18ba0a782a1b6cb85f0f87a6ad416b9f69c881.cache): failed to open stream: Disk quota exceeded in /homepages/9/d315339365/htdocs/gillrd/updates/concrete5.6.4.0/concrete/core/libraries/page_cache/types/file.php on line 62

Warning: Unknown: open(/kunden/homepages/9/d315339365/htdocs/gillrd/files/tmp/sess_c6cb2d30e4dfa7d7c486efb8da7dd50a, O_RDWR) failed: Disk quota exceeded (122) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/kunden/homepages/9/d315339365/htdocs/gillrd/files/tmp) in Unknown on line 0